Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Call 325-676-6068 and ask for the secretary, or stop by the office.
Show All Answers
7 am to 5:30 pm on Weekdays. The service station is open from 5 am until 5 pm on all weekdays except Wednesdays, when it's 7 am to 5:30 pm.
If the vehicle will not move and needs to be towed, the procedure is to call Police's regular number 325-673-8331 in order to get the next authorized wrecker service in the rotation. The vehicle will be towed to the Shop.
If a flat tire occurs, and a spare cannot be found, most local tire service companies have an answering service to dispatch an emergency repairman, if the vehicle needs to be repaired before the Shop opens back up.
A maintenance Preventative Maintenance (PM) (PM-B) is scheduled every 6 months for most vehicles (4 months for refuse trucks). The mileage interval is 12,000 on cars and pickups, 8,000 miles on heavy trucks, and 6,000 miles on refuse trucks.
Every 4,000 miles on most vehicles. For machines with hour meters, the engine manufacturer's recommendation should be followed. However, as a guideline, 150 to 175 hours is used in the absence of the recommendation.
Phone Fleet Management 325-676-6449 and the trip will be scheduled into the Motor Pool, and the Shop will be notified.
Call 325-676-6073 and ask for the foreman.
This causes complications. If it is an emergency and it must be done, at least get the other vehicle's mileage to input into the authorization station. No matter what, notify Fleet Maintenance as soon as possible.
Try another gas pump. There are two pumps for unleaded gas, and two for Diesel.
If neither one will work, the problem may be with the Gasboy card reader. Notify the police, who will try to dispatch a Shop person to get the pumps working again, and go to a Skinny's store or an L and L Convenience Store who are able to fill a City of Abilene vehicle in an emergency. The receipt needs to show the vehicle number, the license tag number, and your clear signature.
In most cases, the odometer reading (mileage). Do not enter the tenths. If your machine only has an hour meter, enter that number. Do not enter the tenths.
If your vehicle has both an hour meter and an odometer, usually the odometer reading is entered, unless you are certain that your vehicle is an exception. If your machine has no meter whatsoever, just enter a zero.
Call Fleet Management at 325-676-6449.